Stub Area Summary - Dell PowerConnect 6224 User Manual

Stub Area Summary

The OSPF Stub Area Summary page displays OSPF stub area detail.
To display the page, click Routing → OSPF → Stub Area Summary in the tree view.
Figure 9-8. OSPF Stub Area Summary
The OSPF Stub Area Summary page displays the following fields:
Area ID — The Area ID of the stub area.
•
• Type of Service — The type of service associated with the stub metric. The switch supports Normal
only.
• Metric Value — The metric value for the default route advertised into the area.
• Import Summary LSAs — Whether the import of Summary LASs is enabled or disabled.
Displaying OSPF Stub Area CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• OSPF Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-8. OSPF Area Configuration Commands
CLI Command
show ip ospf stub table
522
Configuring Routing
Description
Displays the OSPF stub table.