Dell PowerConnect 6224 User Manual page 236

Auth NoPriv — The packet is authenticated.
•
• Auth Priv — The packet is both authenticated and encrypted.
• UDP Port (1 65535) — UDP port used to send notifications. The default is 162.
–
• Filter Name — Check this check box to apply a user-defined SNMP filter (selected from the drop-
down menu) to notifications.
• Timeout (1 300) — Amount of time (seconds) the device waits before resending informs. The default
–
is 15 seconds.
• Retries (1 255) — Maximum number of times the device resends an inform request. The default is 3.
–
Adding a New Notification Recipient
1. Open the Notification Recipients page.
2. Click Add.
The Notification Recipients page displays:
Figure 6-103. Add Notification Recipient
3. Define the relevant fields.
4. Click Apply Changes.
The notification recipient is added, and the device is updated.
236
Configuring System Information