Multicast Route Table - Dell PowerConnect 6224 User Manual

Table 12-2. Multicast Interface Configuration Commands
CLI Command
ip multicast ttl-threshold
show ip mcast interface

Multicast Route Table

Use the Multicast Route Table page is used to display MRoute data.
To display the page, click IPv4 Multicast → Multicast → Multicast Route Table or IPv6 Multicast →
Multicast → Multicast Route Table.
Figure 12-3. Multicast Route Table
The Multicast Route Table page contains the following fields:
• Group IP — The destination group IP address.
• Source IP — The IP address of the multicast packet source that, combined with the Group IP,
identifies an multicast route table entry.
• Incoming Interface — The incoming interface on which multicast packets for this source/group arrive.
718
Configuring IP Multicast
Description
ttlvalue
Applies a to a routing interface.
Displays the multicast information for the specified interface.