Interface Summary - Dell PowerConnect 6224 User Manual

Interface Summary

Use the PIM Interface Summary page to display a PIM interface and its settings.
To display the page, click IPv4 Multicast → PIM → Interface Summary or IPv6 Multicast → PIM →
Interface Summary in the tree view.
Figure 12-36. PIM Interface Summary
The PIM Interface Summary page contains the following fields:
• Interface — Select the interface for which data is to be displayed. There must be configured at least
one router interface before displaying data for a PIM interface, otherwise an error message displays.
Interface Parameters fields are:
• Admin Mode — Displays the administrative status of PIM for the selected interface.
• Protocol State — The operational state of the PIM protocol on this interface.
• IP Address — The IP address of the selected interface.
• Hello Interval — The frequency (in seconds) at which PIM hello messages are transmitted on the
selected interface.
• Join/Prune Interval — The frequency (in seconds) at which PIM Join/Prune messages are transmitted
on this PIM interface.
• DR Priority — Indicates the DR priority on the PIM interface. This field is supported in PIM-SM only.
770
Configuring IP Multicast