Lldp-Med Interface Configuration - Dell PowerConnect 6224 User Manual

Table 7-53. LLDP-MED Global Commands
CLI Command
lldp med faststartrepeatcount
show lldp med
lldp med confignotification
lldp med transmit-tlv

LLDP-MED Interface Configuration

Use the LLDP-MED Interface Configuration page to specify LLDP-MED parameters that affect a
specific interface.
To display the LLDP-MED Interface Configuration page, click Switching → LLDP → LLDP-MED →
LLDP-MED Interface Configuration in the tree view.
Figure 7-100. LLDP-MED Interface Configuration
The LLDP-MED Interface Configuration page contains the following fields:
• Interface — Specifies the list of ports on which LLDP-MED - 802.1AB can be configured. Select the
All option list to configure all interfaces on the system with the same LLDP-MED settings.
• LLDP-MED Mode — Specifies the Link Layer Data Protocol-Media End Point (LLDP-MED) mode
for the selected interface. Enabling MED effectively enables the transmit and receive function of
LLDP.
Description
Sets the value of the fast start repeat count.
Displays a summary of the current LLDP MED configuration.
Enables sending the topology change notifications.
Spruciest which optional TLVs in the LLDP MED set are transmitted
in the LLDPDUs.
Configuring Switching Information
427