File Upload - Dell PowerConnect 6224 User Manual

Powerconnect 6200 series

Hide thumbs Also See for PowerConnect 6224:

Table of Contents

Downloading Files

1. Open the File Download From Server page.

2. Verify the IP address of the server and ensure that the software image or boot file to be downloaded is

available on the server.

3. Complete the Server Address and Source File Name (full path without server IP address) fields.

4. If you are downloading a configuration file, select the Destination File Name.

5. Click Apply Changes.

NOTE: After you start a file download, the page refreshes and a transfer status field appears to indicate the

number of bytes transferred. The Web interface is blocked until the file download is complete.

6. The software is downloaded to the device.

Downloading Files Using CLI Commands

For information about the CLI commands that perform this function, see the Configuration and Image

Files Commands chapter in the

CLI commands you use to download files.

Table 6-49. Downloading Files Commands

File Upload

Use the File Upload to Server page to upload configuration (ASCII), image (binary), operational log,

and startup log files from the device to the server.

To display the File Upload to Server page, click System → File Management → File Upload in the tree

Configuring System Information

CLI Reference Guide

. The following table summarizes the equivalent

Copies files from a source to a destination.

Show Quick Links

Table of Contents