Ospfv2 Trap Flags - Dell PowerConnect 6224 User Manual

Table 6-59. Trap Flag Commands
CLI Command
snmp-server enable traps
show trapflags
show trapflags captive-portal

OSPFv2 Trap Flags

The OSPFv2 Trap Flags page is used to specify which OSPFv2 traps you want to enable or disable.
When the condition identified by an active trap is encountered by the switch, a trap message is sent to
any enabled SNMP Trap Receivers, and a message is written to the trap log.
To access the OSPFv2 Trap Flags page, click System → Trap Manager → OSPFv2 Trap Flags in the
navigation tree.
264
Configuring System Information
Description
Enables SNMP traps globally or enables specific SNMP traps.
Shows the status of the configurable SNMP traps.
Shows the status of captive portal trapflags.