Notification Filter - Dell PowerConnect 6224 User Manual

Configuring Communities Using CLI Commands
For information about the CLI commands that perform this function, see the SNMP Commands chapter
CLI Reference Guide
in the
configure SNMP communities.
Table 6-44. SNMP Communities Commands
CLI Command
show snmp
snmp-server community
snmp-server community-group

Notification Filter

Use the Notification Filter page to set filtering traps based on OIDs. Each OID is linked to a device
feature or a feature aspect. The Notification Filter page also allows you to filter notifications.
To display the Notification Filter page, click System → SNMP → Notification Filters in the tree view.
Figure 6-99. Notification Filter
The Notification Filter page contains the following fields:
Notification Filter Name — Contains a list of user-defined notification filters. A notification filter
•
name can contain a maximum of 30 characters.
• New Object Identifier Tree — Displays the OID configured for the selected filter. This field can be
edited.
• Filter Type — Indicates whether informs or traps are sent regarding the OID to the trap recipients.
232
Configuring System Information
. The following table summarizes the equivalent CLI commands you use to
Description
Displays the SNMP status.
Sets up the community access string to permit access to SNMP
protocol.
Maps SNMP v1 and v2 security models to the group name.