Dell PowerConnect 6224 User Manual page 527
Powerconnect 6200 series
Hide thumbs
Also See for PowerConnect 6224:
- Command line interface manual (1372 pages) ,
- Release note (34 pages) ,
- Planning and preparation manual (12 pages)
Table of Contents
Advertisement
No Neighbor at Source Address — The number of OSPF packets dropped because the sender is not an
•
existing neighbor or the sender's IP address does not match the previously recorded IP address for that
neighbor.
•
Invalid OSPF Packet Type — The number of OSPF packets discarded because the packet type field in
the OSPF header is not a known type.
Hellos Ignored — The number of received Hello packets that were ignored by this router from the new
•
neighbors after the limit has been reached for the number of neighbors on an interface or on the
system as a whole.
•
Hellos Sent — The number of Hello packets sent on this interface by this router.
•
Hellos Received — The number of Hello packets received on this interface by this router.
•
DD Packets Sent — The number of Database Description packets sent on this interface by this router.
•
DD Packets Received — The number of Database Description packets received on this interface by
this router.
•
LS Requests Sent — The number of LS Requests sent on this interface by this router.
•
LS Requests Received — The number of LS Requests received on this interface by this router.
•
LS Updates Sent — The number of LS updates sent on this interface by this router.
•
LS Updates Received — The number of LS updates received on this interface by this router.
•
LS Acknowledgements Sent — The number of LS acknowledgements sent on this interface by this
router.
•
LS Acknowledgements Received — The number of LS acknowledgements received on this interface
by this router.
Displaying OSPF Interface Statistics
1. Open the OSPF Interface Statistics page.
2. Select the interface for which data is to be displayed from the drop-down menu.
Statistics for this interface display.
Displaying OSPF Interface Statistics Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
•
OSPF Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-10. OSFP Interface Statistics Command
CLI Command
show ip ospf interface stats
Description
Displays the statistics for a specific interface.
Configuring Routing
527
Hide quick links:
Advertisement
Table of Contents
