Route Redistribution Configuration - Dell PowerConnect 6224 User Manual

Iftransit Delay Interval (secs) — The OSPF Transit Delay for the virtual link in units of seconds. It
•
specifies the estimated number of seconds it takes to transmit a link state update packet over this
interface.
Displaying the Virtual Link Summary Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• OSPF Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-16. OSPF Virtual Link Summary Command
CLI Command
show ip ospf virtual-link brief

Route Redistribution Configuration

Use the OSPF Route Redistribution Configuration page to configure redistribution in OSPF for routes
learned through various protocols. You can choose to redistribute routes learned from all available
protocols or from selected ones.
To display the page, click Routing → OSPF → Route Redistribution Configuration in the tree view.
Figure 9-19. OSPF Route Redistribution Configuration
The OSPF Route Redistribution Configuration page contains the following fields:
• Source — A protocol configured for OSPF to redistribute the routes learned through this protocol.
Only source routes that have been configured for redistribution by OSPF are available. Possible values
are Static, Connected, and RIP.
546
Configuring Routing
Description
Displays the OSPF Virtual Interface information for all areas in the
system.