Dell PowerConnect 6224 User Manual page 433

• softphonevoice
• videoconferencing
• streammingvideo
• videosignalling
– Vlan Id — Specifies the VLAN ID associated with a particular policy type.
– Priority — Specifies the priority associated with a particular policy type.
DSCP — Specifies the DSCP associated with a particular policy type.
–
– Unknown Bit Status — Specifies the unknown bit associated with a particular policy type.
– Tagged Bit Status — Specifies the tagged bit associated with a particular policy type.
• Inventory — If an inventory TLV is present in LLDP frames, the following information displays:
Hardware Revisions — Specifies the hardware version of the remote device.
–
– Firmware Revisions — Specifies the firmware version of the remote device.
– Software Revisions — Specifies the software version of the remote device.
– Serial Number — Specifies the serial number of the remote device.
Manufacturer Name — Specifies the manufacturer's name of the remote device.
–
– Model Name — Specifies the model name of the remote device.
– Asset ID — Specifies the asset ID of the remote device.
• Location Information — If a location TLV is present in LLDP frames, the following information
displays:
– Sub Type — Specifies type of location information.
– Location Information — Specifies the location information as a string for given type of location
id.
• Extended PoE — Specifies if remote device is a PoE device.
Device Type — Specifies remote device's PoE device type connected to this port.
–
• Extended PoE PSE — If an extended PSE TLV is received in the LLDP frame on this port, the
following information displays:
– Available — Specifies the remote ports PSE power value in tenths of watts.
– Source — Specifies the remote port's PSE power source.
– Priority — Specifies the remote ports PSE power priority.
• Extended PoE PD — If an extended PD TLV is received in the LLDP frame on this port, the following
information displays:
– Required — Specifies the remote port's PD power requirement.
– Source — Specifies the remote port's power source.
Priority — Specifies the remote port's PD power priority.
–
Configuring Switching Information
433