Dell PowerConnect 6224 User Manual page 333

Figure 7-31. Flow Based Mirroring
The Flow Based Mirroring page contains the following fields:
• Policy Name — Selects policy to associate with a traffic class. Policy Name is defined using the
DiffServ "Policy Configuration" web page.
Member Classes — Selects the traffic class associated with this policy. Member Class is defined using
•
the DiffServ "Class Configuration" web page.
• Copy to Interface — When checked, this feature permits packets to be copied to either a unit/port or
LAG.
Mirroring to a Destination Port
1. Open the Flow Based Mirroring page.
2. Specify Policy Name and Member Class, and select the destination unit and port to be affected in
Copy to Interface.
3. Click Apply Changes.
The flow-based mirroring details are copied to the specified port, and the device is updated.
Configuring Flow-based Mirroring Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• QOS Commands
The following table summarizes the equivalent CLI commands for this feature.
Configuring Switching Information
333