the Notification Recipients Tables
Displaying
1. Open Notification Recipients page.
2. Click Show All.
The Notification Recipient Tables page opens:
Figure 6-104. Notification Recipient Tables
Removing Notification Recipients
1. Open the Notification Recipients page.
2. Click Show All.
The Notification Recipient Tables page open.
3. Select the Remove check box for one or more notification recipients in the SNMPV1,2 Notification
Recipient and/or SNMPv3 Notification Recipient Tables.
4. Click Apply Changes.
The recipients are removed, and the device is updated.
Defining SNMP Notification Recipients Using CLI Commands
For information about the CLI commands that perform this function, see the SNMP Commands chapter
CLI Reference Guide
in the
define SNMP notification recipients.
. The following table summarizes the equivalent CLI commands you use to
Configuring System Information
237