Abort Boot Code Update; Update Boot Code - Dell PowerConnect 6224 User Manual

Operational Code Offset........................0x74 (116)
Operational Code FLASH flag....................1
Operational Code CRC...........................0x9B4D
Boot Code Version..............................1
Boot Code Size.................................0x100000 (1048576)
Boot Code Offset...............................0x7ec0bc (8306876)
Boot Code FLASH flag...........................0
Boot Code CRC..................................0x1CB8
VPD - rel 3 ver 1 maint_lvl 0 build_num 4
Timestamp - Thu Jun
File - pc62xxr0v3.2.1.0.stk
2. The boot process resumes.

Abort Boot Code Update

Use option 6 to abort a boot code update initiated by the user. A user can initiate a boot code update by
selecting option 7 on the boot menu or by entering a CLI command. This sets a flag and causes the
system to reboot. When the boot code starts, the system reads the flag and determines that a boot code
update has been requested, and pauses for user response. The boot code update proceeds if there is no
user response within 10 seconds. During that interval, the user can enter the boot menu and select
option 6 to cancel the boot code update and continue rebooting.

Update Boot Code

Use option 7 to update the boot code in the flash memory. This option is only valid after loading new
boot code using Boot Menu option 4. User action is confirmed with a Y/N question before executing the
command.
To download software from the Boot menu:
1. On the Boot menu, select 7 and press <Enter>.
The following prompt displays:
Do you wish to update Boot Code? (y/n) y
Validating image2....OK
Extracting boot code from image...CRC valid
Erasing Boot Flash.....Done.
Wrote 0x10000 bytes.
8 12:51:44 2009
Configuring Dell PowerConnect
101