Dell PowerConnect 6224 User Manual page 131

Figure 6-11. Add Authentication Key
3. Define the fields as needed.
4. Click Apply Changes.
The SNTP authentication key is added, and the device is updated.
Displaying the Authentication Key Table
1. Open the SNTP Authentication page.
2. Click Show All.
The Authentication Key Table page displays:
Figure 6-12. Authentication Key Table
Removing an Authentication Key
1. Open the SNTP Authentication page.
2. Click Show All.
The Authentication Key Table page displays.
3. Select an Authentication Key Table entry by checking its the Remove check box.
4. Click Apply Changes.
The entry is removed, and the device is updated.
Configuring System Information
131