Assigning Users With CLI Commands
For information about the CLI commands that perform this function, see the AAA Commands chapter
CLI Reference Guide
in the
Table 6-26. Users Commands
CLI Command
password
username
show user accounts
Line Passwords
Use the Line Password page to define line passwords for management methods.
To display the Line Password page, click System → Management Security → Line Password in the tree
view.
Figure 6-48. Line Password
The Line Password page contains the following fields:
•
Line Mode — Drop-down menu specifies device access through a Console, Telnet, or Secure Telnet
(SSH) session.
•
Line Password (8
Telnet, or Secure Telnet session. The password appears in the ***** format.
•
Confirm Password (8
the ***** format.
Defining Line Passwords
1. Open the Line Password page.
2. Select device access through a Console, Telnet, or Secure Telnet (SSH) session.
174
Configuring System Information
. The following table summarizes the equivalent CLI commands you use.
Description
Specifies a user password
Establishes a username-based authentication system.
Displays information about the local user database.
64 characters) — The line password for accessing the device through a console,
–
64 characters) — Confirms the new line password. The password appears in
–