Ospfv3 Interface Statistics - Dell PowerConnect 6224 User Manual

Table 10-17. OSPFv3 Interface Commands
CLI Command
ipv6 ospf
ipv6 ospf areaid
ipv6 ospf cost
ipv6 ospf dead-interval
ipv6 ospf hello-interval
ipv6 ospf mtu-ignore
ipv6 ospf network
ipv6 ospf priority
ipv6 ospf retransmit-interval
ipv6 ospf transmit-delay
passive-interface
show ipv6 ospf interface
show ipv6 ospf interface brief
show ipv6 ospf interface vlan

OSPFv3 Interface Statistics

Use the OSPFv3 Interface Statistics page to display OSPFv3 interface statistics. Information is only
displayed if OSPF is enabled. Several fields have been added to this page.
To display the page, click IPv6 → OSPFv3 → Interface Statistics in the tree view.
652
Configuring IPv6
Description
Enables OSPF on a router interface or loopback interface.
Sets the OSPF area to which the specified router interface belongs.
Configures the cost on an OSPF interface.
Sets the OSPF dead interval for the specified interface.
Sets the OSPF hello interval for the specified interface.
Disables OSPF maximum transmission unit (MTU) mismatch
detection.
Changes the default OSPF network type for the interface.
Sets the OSPF priority for the specified router interface.
Sets the OSPF retransmit interval for the specified interface.
Sets the OSPF Transmit Delay for the specified interface.
Sets the interface or tunnel as passive.
Displays the information for the IFO object or virtual interface tables.
Displays brief information for the IFO object or virtual interface
tables.
Displays OSPFv3 configuration and status information for a specific
vlan