Rapid Spanning Tree - Dell PowerConnect 6224 User Manual

Figure 7-42. STP LAG Table
3. To change the STP settings for one or more LAGs, select the Edit option for the LAG(s), configure the
desired settings, and then click Apply Changes.
Defining STP LAG Settings Using CLI Commands
See "Configuring Spanning Tree Port Settings Using CLI Commands" on page 348.

Rapid Spanning Tree

Rapid Spanning Tree Protocol (RSTP) detects and uses network topologies that allow a faster
convergence of the spanning tree without creating forwarding loops.
To display the Rapid Spanning Tree page, click Switching → Spanning Tree → Rapid Spanning Tree in
the tree view.
Figure 7-43. Rapid Spanning Tree
The Rapid Spanning Tree page contains the following fields:
• Interface — Determines if RSTP is enabled on a Unit/Port or on a LAG. Click Unit/Port or LAG to
specify the type of interface, then select the Unit/Port or LAG to configure from the drop-down menu.
State — Displays the spanning tree state for the port.
•
• Role — Displays the spanning tree role for the port in the STP topology.
Configuring Switching Information
351