Available — Specifies available power sourcing equipment's power value in tenths of watts on the
–
port of local device.
Source — Specifies power source of this port.
–
–
Priority — Specifies PSE port power priority.
•
Extended PoE PD — If an extended PD TLV is present in LLDP frame, the following information
displays:
–
Required — Specifies required power device power value in tenths of watts on the port of local
device.
–
Source — Specifies power source of this port.
–
Priority — Specifies PD port power priority.
Viewing LLDP-MED Local Device Information with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
•
LLDP Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-55. LLDP-MED Local Device Information Command
CLI Command
show lldp med local-device
LLDP-MED Remote Device Information
Use the LLDP-MED Remote Device Information page to view the advertised LLDP data advertised by
remote devices.
To display the LLDP-MED Remote Device Information page, click Switching→ LLDP→ LLDP-MED→
LLDP-MED Remote Device Information in the tree view.
Description
Displays the advertised LLDP local data.
Configuring Switching Information
431