Defining Snmp View Settings - Dell PowerConnect 3424 User Manual

Powerconnect 34 series
Hide thumbs Also See for PowerConnect 3424:
Table of Contents

Advertisement

Defining SNMP View Settings

SNMP Views provide access or block access to device features or feature aspects. For example, a
view can be defined which states that SNMP group A has read only (R/O) access to Multicast
groups, while SNMP group B has read-write (R/W) access to Multicast groups. Feature access is
granted via the MIB name, or MIB Object ID.
The Up and Down arrows allow navigating through the MIB tree, and MIB branches.
To open the SNMPv3 View Settings page, click System → SNMP → View Settings in the tree view.
Figure 6-58. SNMPv3 View Settings
The SNMPv3 View Settings page contains the following fields:
View Name — Contains a list of user-defined views. The view name can contain a maximum of 30
alphanumeric characters.
New Object ID Subtree — Indicates the device feature OID included or excluded in the selected
SNMP view.
Selected from List — Select the device feature OID by using the Up and Down buttons to
scroll through a list of all device OIDs.
Insert — Specify the device feature OID.
View Type — Indicates if the defined OID branch will be included or excluded in the selected
SNMP view.
Configuring System Information
193

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents