Viewing the Auto VoIP Summary Table
1. Open the Auto VoIP Interface Configuration page.
2. Click Show All.
The Auto VoIP Summary page opens.
Figure 11-23. Auto VoIP Summary
Configuring Auto VoIP Interfaces Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
•
QoS Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 11-12. AutoVoIP Interface Commands
CLI Command
switchport voice detect auto
show switchport voice
Description
Enables the VoIP Profile on all the specified interface.
Displays the status of auto-voip on an interface or all interfaces.
Configuring Quality of Service
711