Ospfv3 Neighbor Table - Dell PowerConnect 6224 User Manual

Table 10-19. OSPFv3 Neighbor Command
CLI Command
show ipv6 ospf neighbor

OSPFv3 Neighbor Table

Use the OSPFv3 Neighbor Table page to display the OSPF neighbor table list. When a particular
neighbor ID is specified, detailed information about a neighbor is given. The neighbor table is only
displayed if OSPF is enabled.
To display the page, click IPv6 → OSPFv3 → Neighbor Table in the tree view.
Figure 10-25. OSPFv3 Neighbor Table
The OSPFv3 Neighbor Table page displays the following fields:
• Interface — Selects the interface for which data is to be displayed or configured.
Neighbor Router ID — A 32-bit integer in dotted decimal format representing the neighbor interface.
•
• Priority — The priority of this neighbor in the designated router election algorithm. A value of 0
indicates that the neighbor is not eligible to become the designated router on this network.
658
Configuring IPv6
Description
Displays information about OSPF neighbors.