Radius Accounting Server Statistics - Dell PowerConnect 6224 User Manual

Figure 6-59. RADIUS Accounting Server Status
3. To remove a named accounting server, select the check box in the Remove column.
4. Click Apply Changes.
The RADIUS accounting server is removed from the list.
Configuring RADIUS Accounting Server Settings Using CLI Commands
For information about the CLI commands that perform this function, see the RADIUS Commands
CLI Reference Guide
chapter in the
use.
Table 6-32. RADIUS Accounting Server Commands
CLI Command
acct-port
key
name
radius-server acct
show radius-servers

RADIUS Accounting Server Statistics

Use the RADIUS Accounting Server Statistics page to view statistical information for each RADIUS
accounting server configured on the system.
To access the RADIUS Accounting Server Statistics page, click System → Management Security →
RADIUS Accounting Server Statistics in the tree view.
. The following table summarizes the equivalent CLI commands you
Description
Sets the port number for the designated radius accounting server.
Sets the authentication and encryption key for all RADIUS
communications between the switch and the RADIUS daemon.
Assigns a name to a RADIUS accounting server.
Specifies a RADIUS accounting server host and enter RADIUS Server
Configuration mode.
Displays the RADIUS accounting server settings.
Configuring System Information
187