Dell PowerConnect 6224 User Manual page 749

Powerconnect 6200 series
Hide thumbs Also See for PowerConnect 6224:
Table of Contents

Advertisement

Table 12-21. IGMP Proxy Interface Membership Command
CLI Command
show ip igmp-proxy
show ip igmp-proxy groups
IGMP Proxy Interface Membership Info Detailed
Use the IGMP Proxy Interface Membership Info Detailed page to display detailed interface
membership data. You must have configured at least one router interface before you can display detailed
interface membership information, and it should not be an IGMP routing interface. Also, if no group
membership reports have been received on the selected interface you cannot display data.
To display the page, click IPv4 Multicast → IGMP → Proxy Interface → Interface Membership Info
Detailed in the tree view.
Figure 12-22. IGMP Proxy Interface Membership Info Detailed
The IGMP Proxy Interface Membership Info Detailed page contains the following fields:
Interface — Select the interface for which data is to be displayed.
Multicast Group IP — Select the IP multicast group address for which data is to be displayed. If no
group membership reports have been received on the selected interface, you are not able to make this
selection, and none of the non-configurable data is displayed.
Source IP — This parameter shows source addresses that are members of this multicast address.
Last Reporter — The IP address of the source of the last membership report received for the selected
interface's IP Multicast group address.
Description
Displays a summary of the host interface status parameters.
Displays a table of information about multicast groups that IGMP
Proxy reported.
Configuring IP Multicast
749

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents