Dell PowerConnect 6224 User Manual page 394

LAGs — Displays and assigns multicast group membership to LAGs. To assign membership, click in
•
Static for a specific LAG. Each click toggles between S, F, and blank. See the following table for
definitions.
The following table contains definitions for port/LAG IGMP management settings.
Table 7-39. Port/LAG IGMP Management Settings
Port Control
D
S
F
Blank
Adding Bridge Multicast Addresses
1. Open the Bridge Multicast Group page.
2. Click Add.
The Add Bridge Multicast Group page displays.
Figure 7-75. Add Bridge Multicast Group
394
Configuring Switching Information
Definition
Dynamic: Indicates that the port/LAG was dynamically joined to the Multicast group
Current
(displays in the row).
Static: Attaches the port to the Multicast group as a static member in the
Current
Displays in the row once Apply Changes is clicked.
Forbidden: Indicates that the port/LAG is forbidden entry into the Multicast group in the
Static
row. Displays in the
Blank: Indicates that the port is not attached to a Multicast group.
Current
row once Apply Changes is clicked.
Static
row.