Mld Routing Interface Configuration - Dell PowerConnect 6224 User Manual

Configuring MLD Global Settings Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• IPv6 Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 12-23. IPv6 MLD Global Commands
CLI Command
ipv6 mld router

MLD Routing Interface Configuration

Use the MLD Routing Interface Configuration page to enable selected IPv6 router interfaces to
discover the presence of multicast listeners, the nodes who wish to receive the multicast data packets, on
its directly attached interfaces. To access this page, click IPv6 Multicast → MLD → Routing Interface →
Interface Configuration in the navigation tree.
Figure 12-24. MLD Routing Interface Configuration
The MLD Routing Interface Configuration page contains the following fields:
Interface — From the drop-down menu, select the VLAN routing interface to be configuration.
•
• Interface Mode — Select Enable or Disable to set the administrative status of MLD on the selected
interface. The default is Disable.
Version — Select the MLD version.
•
752
Configuring IP Multicast
Description
Enables MLD in the router in global configuration mode and for a
specific interface in interface configuration mode.