Figure 10-11. DHCPv6 Interface Configuration - Relay
3. Modify the fields as needed.
4. Click Apply Changes.
The DHCPv6 interface configuration is saved, and the device is updated.
Configuring a DHCPv6 Interface for Server Interface Mode
1. Open the DHCPv6 Interface Configuration page.
2. Specify the desired Interface, and select Server from the Interface Mode drop down menu.
The following screen appears:
Figure 10-12. DHCPv6 Interface Configuration - Server
3. Modify the fields as needed.
4. Click Apply Changes.
632
Configuring IPv6