Lag Membership - Dell PowerConnect 6224 User Manual

Modifying LACP Parameters for Multiple Ports
1. Open the LACP Parameters page.
2. Click Show All.
The LACP Parameters Table displays.
3. Click Edit for each Port to modify.
4. Edit the fields as needed.
5. Click Apply Changes.
The LACP Parameter settings are modified, and the device is updated.
Configuring LACP Parameters Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
• LACP Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-34. LACP Commands
CLI Command
lacp port-priority
lacp system-priority
lacp timeout
show lacp ethernet
show lacp port-channel

LAG Membership

Your switch supports 48 LAGs per system, and eight ports per LAG. Use the LAG Membership page to
assign ports to LAGs and LACPs.
To display the LAG Membership page, click Switching → Link Aggregation → LAG Membership in the
tree view.
386
Configuring Switching Information
:
Description
Configures the priority value for physical ports.
Configures the system LACP priority.
Assigns an administrative LACP timeout.
Displays LACP information for Ethernet ports.
Displays LACP information for a port-channel.