1. Open the MAC ACL Rule Configuration page.
2. Select the desired ACL from the MAC ACL drop-down menu.
3. Select the desired rule from the Rule ID drop-down menu.
4. Modify the remaining fields as needed.
5. Click Apply Changes.
The MAC-based rule is modified, and the device is updated.
Adding a New Rule to a MAC-based ACL
1. Open the MAC ACL Rule Configuration page.
2. Select the desired ACL from the MAC ACL drop-down menu.
3. Specify Create New Rule for Rule ID.
4. Enter a new ID number.
5. Define the remaining fields as needed.
6. Click Apply Changes.
The new rule is assigned to the specified MAC-based ACL.
Removing a Rule From a MAC-based ACL
1. Select an ACL.
2. Select a rule from the Rule ID drop-down menu.
3. Check the Remove check box.
4. Click Apply Changes.
The MAC-based ACL is removed, and the device is updated.
Configuring MAC-based ACLs Rules Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
•
ACL Commands
The following table summarizes the equivalent CLI commands you use to define a MAC ACL.
308
Configuring Switching Information
: