Class Configuration - Dell PowerConnect 6224 User Manual

Changing Diffserv Admin Mode
1. Open the Diffserv Configuration page.
2. Turn Diffserv Admin Mode on or off by selecting Enable or Disable from the drop-down menu.
3. Click Apply Changes.
The Diffserv Admin Mode is changed, and the device is updated.
Displaying MIB Tables Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• QoS Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 11-1. DiffServ Configuration Commands
CLI Command
diffserv
show diffserv

Class Configuration

Use the Diffserv Class Configuration page to add a new Diffserv class name, or to rename or delete an
existing class.
To display the page, click Quality of Service → Differentiated Services → Class Configuration in the tree
view.
682
Configuring Quality of Service
Description
Sets the DiffServ operational mode to active.
Displays the DiffServ General Status information.