Dell PowerConnect 6224 User Manual page 245

Figure 6-109. Copy Files
The Copy Files page contains the following fields:
Copy Master Firmware — Specifies that a software image file should be copied.
•
• Destination — The destination unit(s) (within the stack) to which the file is copied. Select from the
menu one of the following values:
– All — All units in the stack.
– Unit — Specified unit within the stack, unit 1 for example.
• Copy Configuration — Specifies that a configuration file should be copied.
Source — The configuration source file from which the file is copied. Select from the menu one of the
•
following possible values:
– Running Config — Uploads the running configuration file.
– Startup Config — Uploads the startup configuration file.
– Backup Config — Uploads the backup configuration file.
• Destination — The destination configuration file to which the file is copied. Select from the menu
one of the following:
– Startup Config — The startup configuration file.
– Backup Config — The backup configuration file.
• Restore Configuration Factory Default — Select the radio button and click Apply Changes to restore
all configuration structures to the defaults.
Configuring System Information
245