System Leds - Dell PowerConnect 6224 User Manual

Table 4-5. 10/100/1000 Base-T Port Definitions (6224P and 6248P)
LED Color
Green Blinking
Amber Solid
Amber Blinking
Off

System LEDs

The system LEDs, located on the right side of the front panel, provide information about the power
supplies, fans, thermal conditions, and diagnostics. Figure 4-17 illustrates the System LEDs.
Figure 4-17. System LEDs
Table 4-6 contains the System LED definitions.
Table 4-6. System LED Definitions
LED Color
DIAG Flashing Green
Green
Red
RPS Green
Red
Definition
The port is operating at transitional
mode. The PoE powered device is
being detected, or is faulty.
An overload or short has occurred on
the powered device.
The powered device power
conception exceeds the predefined
power allotment.
No powered device is detected.
Definition
A diagnostics test is in progress.
The diagnostics test was successfully completed.
The diagnostics test failed.
Redundant Power Supply (RPS) is present and operating
correctly.
Redundant Power Supply is present, but has failed.
Hardware Description
67