In addition to the fields in the SNMPv1, 2 Community page, the Add SNMPv1,2 Community page
contains the All (0.0.0.0) field, which indicates that the community can be used from any
management station.
4. Click Apply Changes.
The new community is saved, and the device is updated.
Displaying Communities
1. Open the SNMPv1, 2 Community page.
2. Click Show All.
The Basic and Advanced Table page displays.
Figure 6-98. Basic and Advanced Table
Removing Communities
1. Open the SNMPv1, 2 Community page.
2. Click Show All.
The Basic and Advanced Table page displays.
3. Select a community and check the Remove check box.
4. Click Apply Changes.
The community entry is removed, and the device is updated.
Configuring System Information
231