Time Zone Configuration - Dell PowerConnect 6224 User Manual

Displaying System Resources Using CLI Commands
For information about the CLI commands that perform this function, see the System Management
Commands chapter in the
commands you use to display system resources information.
Table 6-4. System Resources Commands
CLI Command
show memory cpu
show process cpu

Time Zone Configuration

Use the Time Zone Configuration to configure the time zone difference from Coordinated Universal
Time (UTC).
To display the Time Zone Configuration page, click System → General → Time Zone Configuration in
the tree view.
Figure 6-5. Time Zone Configuration
The Time Zone Configuration page contains the following fields:
• Hours-offset — Set the hours difference from UTC. (Range: -12 to +13)
• Minutes-offset — Set the minutes difference from UTC. (Range: 0
Zone — Set the acronym of the time zone. (Range: 0
•
Defining the Time Zone Parameters
1. Open the Time Zone Configuration page.
2. Define the fields as needed.
3. Click Apply Changes.
122
Configuring System Information
CLI Reference Guide
. The following table summarizes the equivalent CLI
Description
Checks the total and available RAM space on the switch.
Checks the CPU utilization for each process currently running on the
switch.
59)
–
4 characters)
–