Industry Standard Discovery Protocol; Isdp Global Configuration - Dell PowerConnect 6224 User Manual

Configuring and Viewing sFlow Settings Using CLI Commands
For information about the CLI commands that perform this function, see the sFlow Commands chapter
CLI Reference Guide
in the
configure and view sFlow settings.
Table 6-66. sFlow Poll Configuration Commands
CLI Command
sflow polling
sflow polling (Interface Mode)

Industry Standard Discovery Protocol

The Industry Standard Discovery Protocol (ISDP) is a proprietary Layer 2 network protocol that inter-
operates with Cisco→ devices running the Cisco Discovery Protocol (CDP). ISDP is used to share
information between neighboring devices. The switch software participates in the CDP protocol and is
able to both discover and be discovered by other CDP-supporting devices.
The ISDP menu contains links to the following pages:
•

ISDP Global Configuration

• Cache Table
• Interface Configuration
• ISDP Statistics
ISDP Global Configuration
From the ISDP Global Configuration page, you can configure the ISDP settings for the switch, such as
the administrative mode.
To access the ISDP Global Configuration page, click System → ISDP → Global Configuration in the
navigation tree.
. The following table summarizes the equivalent CLI commands you use to
Description
Enables a new sflow poller instance for the data source if rcvr_idx is
valid.
Enable a new sflow poller instance for this data source if rcvr_idx is
valid.
Configuring System Information
279