Route Entry Configuration - Dell PowerConnect 6224 User Manual

– OSPF Type-1
– OSPF Type-2
– RIP
• Next Hop Interface — The outgoing router interface to use when forwarding traffic to the destination.
• Next Hop IP Address — The outgoing router IP address to use when forwarding traffic to the next
router (if any) in the path towards the destination. The next router is always one of the adjacent
neighbors or the IP address of the local interface for a directly attached network.
Displaying the Best Routes Table Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• IP Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-33. Best Routes Table Command
CLI Command
show ip route preferences

Route Entry Configuration

Use the Router Route Entry Configuration page to add new and configure router routes.
To display the page, click Routing → Router → Route Entry Configuration in the tree view.
Figure 9-37. Router Route Entry Configuration
The Router Route Entry Configuration page contains the following fields:
Description
Displays detailed information about the route preferences.
Configuring Routing
577