2. Modify the fields as needed.
3. Click Apply Changes.
The route entry is configured for IPv6, and the device is updated.
Configuring Route Entry the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
•
IPv6 Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-27. IPv6 Route Commands
CLI Command
ipv6 route
IPv6 Route Table
Use the IPv6 Route Table page to display all active IPv6 routes and their settings.
To display the page, click IPv6 → IPv6 Routes → IPv6 Route Table in the tree view.
Description
Configures an IPv6 static route
673
Configuring IPv6