Dell PowerConnect 6224 User Manual page 517

Table 9-6. OSPF Global Commands
CLI Command
auto-cost
bandwidth
capability opaque
clear ip ospf
default-information originate
default-metric
distance ospf
enable
exit-overflow-interval
external-lsdb-limit
ip ospf mtu-ignore
maximum-paths
passive-interface default
router-id
router ospf
show ip ospf
show ip ospf abr
show ip ospf asbr
show ip ospf statistics
timers spf
trapflags
1583compatibility
Description
Changes the reference bandwidth used in computing link cost.
Changes the bandwidth used in computing link cost.
Enables Opaque Capability on the router.
Resets specific OSPF states.
Controls the advertisement of default routes.
Sets a default for the metric of distributed routes.
Sets the route preference value of OSPF in the router.
Resets the default administrative mode of OSPF in the router (active).
Configures the exit overflow interval for OSPF.
Configures the external LSDB limit for OSPF.
Disables OSPF maximum transmission unit (MTU) mismatch
detection.
Sets the number of paths that OSPF can report for a given destination.
Enables the global passive mode by default for all interfaces.
Sets a 4-digit dotted-decimal number uniquely identifying the router
OSPF ID.
Enters Router OSPF mode.
Displays information relevant to the OSPF router.
Displays the internal OSPF routing table entries to Area Border
Routers (ABR).
Displays the internal OSPF routing table entries to Autonomous
System Boundary Routes (ASBR).
Displays information about recent Shortest Path First (SPF)
calculations.
Configures the SPF delay and hold time.
Enables OSPF traps.
Enables OSPF 1583 compatibility.
Configuring Routing
517