Radius Accounting Server Configuration - Dell PowerConnect 6224 User Manual

Table 6-31. RADIUS Server Commands
CLI Command
auth-port
key
msgauth
name
primary
radius-server host
show radius-servers

RADIUS Accounting Server Configuration

From the RADIUS Accounting Server Configuration page, you can add a new RADIUS accounting
server, configure settings for a new or existing RADIUS accounting server, and view RADIUS accounting
server status information. The RADIUS client on the switch supports up to 32 named authentication
and accounting servers.
To access the RADIUS Server Configuration page, click System → Management Security → RADIUS
Accounting Server Configuration in the tree view.
Figure 6-57. RADIUS Accounting Server Configuration
The RADIUS Accounting Server Configuration page contains the following fields:
Description
Sets the port number for authentication requests of the designated
radius server.
Sets the authentication and encryption key for all RADIUS
communications between the switch and the RADIUS daemon.
Enables the message authenticator attribute to be used for the
RADIUS Authenticating server being configured.
Assigns a name to a RADIUS server.
Specifies that a configured server should be the primary server in the
group of authentication servers which have the same server name.
Specifies a RADIUS server host and enter RADIUS Configuration
mode.
Displays the RADIUS server settings.
Configuring System Information
185