Interface Membership Information-Detailed - Dell PowerConnect 6224 User Manual

Table 12-30. IPv6 MLD Membership Information Command
CLI Command
show ipv6 mld-proxy groups
Interface Membership Information—Detailed
The Interface Membership Information—Detailed page provides additional information on the IP
multicast groups for which the MLD proxy interface has received membership reports. To display this
page, click IPv6 Multicast → MLD → Proxy Interface → Interface Membership Info Detailed in the
navigation tree.
Figure 12-32. Interface Membership Information—Detailed
The Interface Membership Information — Detailed page contains the following fields:
• Interface — Select the interface on which MLD proxy is enabled for which data is to be displayed.
• Multicast Group IP — Select the IP multicast group address for which data is to be displayed. If no
group membership reports have been received on the selected MLD Proxy interface you will not be
able to make this selection, and none of the non-configurable data will be displayed.
• Source Address — This parameter shows source addresses which are members of this multicast
address.
• Expiry Time — Displays the expiry time in hours:minutes:seconds since the entry was created in the
cache table.
Click Refresh to refresh the data on the screen with the present state of the data in the router.
•
DisplayingIPv6 MLD Membership Detailed Information Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• IPv6 Routing Commands
764
Configuring IP Multicast
Description
Displays information about multicast groups that the MLD Proxy
reported.