Versions - Dell PowerConnect 6224 User Manual

Power Supply Status — Displays the power supply status.
•
– — The power supply is operating normally.
– — The power supply is not operating normally.
– Not Present — The power supply is currently not present.
• Temperature — Displays the temperature at which the device is currently running.
Viewing System Health Information Using CLI Commands
For information about the CLI commands that perform this function, see the System Management
Commands chapter in the
commands you use to view system health information.
Table 6-2. System Health Commands
CLI Command
show system
show system power
show system temperature

Versions

Use the Versions page to view information about the software versions currently running.
To display the Versions page, click System → General → Versions in the tree view.
Figure 6-3. Versions
The Versions page contains the following fields:
• Unit No. — Displays the unit's number in the stack.
• Boot Version — Displays the version of the boot code.
• Image1 Version — Displays the version number of one of the two available software images.
• Image2 Version — Displays the version number of the other of the two available software images.
CLI Reference Guide
. The following table summarizes the equivalent CLI
Description
Use to display system information.
Displays the power supply status.
Displays the system temperature and fan status.
Configuring System Information
119