Servers - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Network and Security Manager Installation Guide
38
- Install GUI Server
- Install High Availability Server
- Store base directory for management servers as /usr/netscreen
- This machine will have base license with maximum 25 devices
- This machine does not participate in an HA cluster
- Store Device Server data in /var/netscreen/DevSvr
- Store GUI Server data in /var/netscreen/GuiSvr
- Store GUI Server database log in /var/netscreen/GuiSvr/xdb/log
- Use IP address 10.157.48.108 for management
- Use port 8443 for NBI Service
- Connect to GUI Server at 10.157.48.108:7801
- Set password for 'super' user
- CFM user: cfmuser
- CFM Password set for 'cfmuser'
- Servers will be restarted automatically in case of a failure
- Local database backups are enabled
- Start backups at 02
- Daily backups will not be sent to a remote machine
- Number of database backups to keep: 7
- HA rsync command backup timeout: 3600
- Create database backup in /var/netscreen/dbbackup
- Postgres DevSvr Db Server port: 5432
- Postgres DevSvr Db super user: nsm
- Postgres DevSvr Db password set for 'nsm'
- Start server(s) when finished: Yes
Are the above actions correct? (y/n)> y
########## PERFORMING INSTALLATION TASKS ##########
----- INSTALLING Device Server -----
Looking for existing RPM package............................ok
Removing existing Device Server RPM.........................ok
Installing Device Server RPM................................ok
Installing JRE..............................................ok
Installing GCC..............................................ok
Creating var directory......................................ok
Creating /var/netscreen/dbbackup............................ok
Putting NSROOT into start scripts...........................ok
Filling in Device Server config file(s).....................ok
Setting permissions for Device Server.......................ok
----- Setting up PostgreSQL for DevSvr -----
Setting up PostgreSQL for DevSvr............................ok
Installation of Device Server complete.
----- INSTALLING GUI Server -----
Looking for existing RPM package............................ok
Removing existing GUI Server RPM............................ok
Installing GUI Server RPM...................................ok
Installing JRE..............................................ok
Installing GCC..............................................ok
Creating var directory......................................ok
Putting NSROOT into start scripts...........................ok
Filling in GUI Server config file(s)........................ok
Setting permissions for GUI Server..........................ok
Running generateMPK utility.................................ok
Running fingerprintMPK utility..............................ok
Installation of GUI Server complete.
----- INSTALLING HA Server -----
Looking for existing RPM package............................ok
Copyright © 2010, Juniper Networks, Inc.