Upgrading To Nsm Release 2010.4 On An Nsm Central Manager Appliance (Offline Mode) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Network and Security Manager Installation Guide

Upgrading to NSM Release 2010.4 on an NSM Central Manager Appliance (Offline Mode)

162
Configuring backup options
Configuring the client download and NBI port
If applicable, follow the installer prompts to configure these options.
The script next prompts you to restart the servers when the installation is finished.
Type y and press Enter to restart the servers when finished. Type n and press Enter if
12.
you do not want to restart server processes.
The script prompts you to verify your upgrade configuration settings.
Verify your settings. If they are correct, type y and press Enter to proceed. If settings
13.
are incorrect, type n and press Enter to return to the original selection prompt.
The upgrade proceeds automatically. The installer performs the following actions:
Extracts and decompresses the software payloads.
Upgrades the Device Server.
Upgrades the GUI Server.
Installs the HA Server.
Sets start scripts.
Performs postinstallation tasks such as removing the staging directory and starting
the server processes (if configured).
Messages display the installation progress.
After the installation script finishes, it generates a log file with the output of the
installation commands for troubleshooting. The installer indicates the name of the
installation log file and the directory location where it is saved. This file is saved by
default in the
/usr/netscreen/DevSvr/var/errorLog
After successful installation, copy the installer file
14.
the directory and enter the following commands:
/var/install
rm -f NSM-RS
chmod 755 nsm2010.4_servers_linux_x86.sh
ln -s nsm2010.4_servers_linux_x86.sh NSM-RS
This section provides instruction on upgrading to NSM 2010.4 on the NSM Central Manager
appliance if the NSM Central Manager appliance is not connected to the Internet.
From the NSM Software Download page, click the Central Manager upgrade link to
1.
download the NSM Central Manager Appliance software. The downloaded file will
have the name
nsm2010.4_servers_upgrade_cm.zip
From the NSM Software Download page, click the Offline Server upgrade link to
2.
download the NSM CM appliance offline upgrade software. The downloaded file will
have the name nsm2010.4_offline_upgrade.zip
subdirectory.
nsm2010.4_servers_linux_x86.sh
.
.
Copyright © 2010, Juniper Networks, Inc.
to