Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual page 55

Copyright © 2010, Juniper Networks, Inc.
NOTE: Make a note of the password that you have set for the superuser
account. You need this when you first log in to the UI.
Enter a one-time password for the GUI Server. This password authenticates this server
14.
to its peers in a high-availability configuration and to the central manager.
The installer prompts you to determine if you want to use a Statistical Report Server
with the GUI Server.
Enter n if you are not installing NetScreen-Statistical Report Server with NSM. Enter
15.
y if you are installing NetScreen-Statistical Report Server with NSM.
If you typed y, the installer prompts you to configure parameters required for the
management system to work with the Statistical Report Server (that is, database
type, database server IP address, database port, database name, database username,
database password). Refer to the NetScreen-Statistical Report Server Installer's Guide
for more information about these parameters.
The installer next creates a user in the NSM group for performing configuration file
management actions and prompts for a password.
Enter a password for the configuration-file management (CFM) user.
16.
Because the UNIX password can not be saved in plain text format, the installer prompts
a second time to enter the same password to save in
for auto archival configuration settings.
NOTE: The CFM passwords for NSM and for UNIX must be identical,
although NSM does not check that they are the same.
The installer next prompts if you want the server processes to be restarted
automatically on failure.
Enter y to have the server processes restarted automatically on failure.
17.
The installer next prompts if you want this server to perform a daily backup of the
database locally.
Enter y if you want NSM to perform a local backup of the database on a daily basis.
18.
Enter n if you do not want the management system to backup the database locally.
If you specify that you want to perform automatic backups, the installer prompts you
to configure options for the backup operation:
NOTE: If you want to specify remote backup, you must allow local backup.
Chapter 3: Installing NSM in a Standalone Configuration
file, which will be used
guiSvr.cfg
33