Table of Contents
Advertisement
Network and Security Manager Installation Guide
GUI Server
216
You can also configure settings on the GUI Server to improve database access
performance. To do so, modify the set_cachesize parameter in the
/var/netscreen/GuiSvr/var/xdb/data/DB_CONFIG
and CPU numbers. For example, on scale test bed (with 8 GB RAM and 4 CPUs), we
recommend that you set this value as follows:
set_cachesize 0 1024000000 4
If you need more memory, change the BDB config to increase the exiting limit. Increase
the parameters listed below in the
set_data_dir .
set_lg_dir ../log
set_lg_regionmax 600000
set_lk_max_lockers 200000
set_lk_max_locks 200000
set_lk_max_objects 200000
set_cachesize 0 1024000000 1
according to available system memory
/var/netscreen/GuiSvr/xdb/data/DB_CONFIG
Copyright © 2010, Juniper Networks, Inc.
file.
Advertisement
Table of Contents
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 and is the answer not in the manual?