Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual page 103

Copyright © 2010, Juniper Networks, Inc.
Table 13: Simple HA Configuration—System Parameters (continued)
Parameter Description
One-time GUI Server A password that authenticates the server to its peers
password in a high-availability configuration, or authenticates a
regional server with a central manager.
Configuration file Configures a user and password for NSM to perform
management configuration file management operations, and a
password corresponding UNIX user and password. The NSM and
UNIX passwords must be identical.
Primary HA Server IP IP address of the primary server participating in the HA
address cluster.
Secondary HA Server IP address of the secondary server participating in the
IP address HA cluster.
Heartbeat links Number of heartbeat communication paths between
between primary and the primary and secondary machine.
secondary machine
By default, there is 1 communication link between the
primary and secondary machine. This in addition to the
data network link already existing in the
primary/secondary HA Server IP address.
Shared password for This is the password that is required to authenticate
heartbeat heartbeat messages between the primary and
authentication. secondary HA servers.
IP Address for Primary IP address used for heartbeat communications on the
machine's heartbeat primary server machine.
link
Port used for heartbeat The port number used for heartbeat communications.
communication
The default port is 7802.
Heartbeat messages Time interval (in seconds) between heartbeat
time interval messages.
The default is 15 seconds.
Missing heartbeats Number of missing heartbeat messages before
before switchover automatic switchover to the secondary machine occurs.
occurs
The default is 4 messages.
IP Address outside the Network IP address used to monitor this server's
HA cluster network connection.
Chapter 5: Installing NSM with High Availability
Your Value
81