Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual page 168

Network and Security Manager Installation Guide
146
########## GATHERING INFORMATION ##########
Checking device count.......................................ok
1) Clean install of both Device Server and GUI Server
2) Upgrade both Device Server and GUI Server from 2008.1r1 to 2010.4
Enter selection (1-2) [2]> 2
Do you want to do NSM installation with base license? (y/n) [y]>
Enter base directory location for management servers [/usr/netscreen]>
Enable FIPS Support? (y/n) [n]>
Number of Devices managed by NSM is: 0
########## GENERAL SERVER SETUP DETAILS ##########
Will this machine participate in an HA cluster? (y/n) [n]>
==> Set to n
########## DEVICE SERVER SETUP DETAILS ##########
########## GUI SERVER SETUP DETAILS ##########
==> Set GUI Server one-time password
Will a Statistical Report Server be used with this GUI Server? (y/n) [n]>
==> CFM user is set to 'cfmuser'
CFM password for user 'cfmuser'
Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
Enter the same password again for CFM user
Changing password for user cfmuser.
New UNIX password:
BAD PASSWORD: it is based on a dictionary word
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
########## HIGH AVAILABILITY (HA) SETUP DETAILS ##########
Automatic restarts of servers? (y/n) [y]>
==> Set to y
########## BACKUP SETUP DETAILS ##########
Will this machine require local database backups? (y/n) [y]>
==> Set to y
==> Setting start hour for database backup to 02
Will daily backups need to be sent to a remote machine? (y/n) [n]>
==> Set to n
Enter number of database backups to keep. The default value will keep the last
seven backups.
The oldest backup copy will be overwritten by the new backup copy [7]>
Copyright © 2010, Juniper Networks, Inc.