Installing Nsm 2010.4 - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Installing NSM 2010.4

Copyright © 2010, Juniper Networks, Inc.
LC_NUMERIC=en_US.UTF-8
LC_TIME=en_US.UTF-8
Reboot the Solaris server.
3.
/usr/sbin/reboot
The installer is designed to guide you through all of the steps to configure the required
system parameters.
To install the management system on the same system:
Load the installer software onto the server where you have decided to use NSM 2010.4.
1.
You can run the installer directly from the NSM installation CD, copy the installer to
a directory on the server, or download the installer from the Juniper Networks Customer
Services online website.
Unless installing from CD, navigate to the directory where you saved the management
2.
system installer file. We recommend that you save the installer in the
subdirectory.
Run the management system installer.
3.
On Linux, run the following command:
sh nsm2010.4_servers_linux_x86.sh
On Solaris, run the following command:
sh nsm2010.4_servers_sol_sparc.sh
The installation begins automatically by performing a series of preinstallation checks.
The installer ensures that:
The OS version and specified architecture are compatible.
You are installing the correct software for your operating system.
All of the needed software binaries and packages are present.
If any component is missing, the installer displays a message identifying the missing
component:
Checking for platform-specific packages.....................FAILED
The Following list of Packages are Required for NSM installation.
Please install the system update utility before continuing.
chkfontpath
You have the correct version of the PostgreSQL database.
You have correctly logged in as root and that the NSM user exists. The installer
creates the NSM user, if it does not already exist.
For Linux servers, the installer checks whether iptables is running. If not, then the
installer continues.
Chapter 3: Installing NSM in a Standalone Configuration
/tmp
29