Copyright © 2010, Juniper Networks, Inc.
Enter an IP address outside of the cluster []> 10.150.47.254
Enter the rsync replication timeout [3600]>
Enter HA directory [/var/netscreen/dbbackup]>
The HA server(s) requires that you have previously installed the rsync program.
Enter the full path to rsync [/usr/bin/rsync]>
The HA server(s) requires that you have previously installed the ssh program.
Enter the full path for the ssh command [/usr/bin/ssh]>
Note: A trust relationship between the primary and the
secondary server, via ssh-keygen, is a requirement for the
remote replication to work properly.
Please reset the trust relationship with 'nsm' user.
Here are sample commands:
cd /home/nsm
su nsm
ssh-keygen -t rsa
chmod 0700 .ssh
-- then copy .ssh/id_rsa.pub to the peer machines' .ssh/authorized_keys
########## BACKUP SETUP DETAILS ##########
Will this machine require local database backups? (y/n) [y]>
Enter hour of day to start the database backup (00 = midnight, 02 = 2am, 14 = 2pm
...)[02]>
Will daily backups need to be sent to a remote machine? (y/n) [n]>
Enter number of database backups to keep [7]>
Enter the rsync backup timeout [3600]>
########## DEVSVR DB SETUP DETAILS ##########
Enter Postgres DevSvr Db port [5432]>
Enter Postgres DevSvr Db super user [nsm]>
Enter Postgres DevSvr Db password for user 'nsm'
Enter password (password will not display as you type)>
Please enter again for verification
Enter password (password will not display as you type)>
########## POST-INSTALLATION OPTIONS ##########
Start High Availability daemon processes when finished? (y/n) []> n
########## CONFIRMATION ##########
About to proceed with the following actions:
- Install Device Server
- Install GUI Server
- Install High Availability Server
- Store base directory for management servers as /usr/netscreen
- This machine will have base license with maximum 25 devices
- This machine participates in an HA cluster
Chapter 5: Installing NSM with High Availability
99
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 and is the answer not in the manual?