Generating The License Key For An Nsm Appliance Upgrade Installation; Generating The License Key File For An Nsm 2007.3 Or Later High Availability Upgrade Installation - Juniper NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 Installation Manual

Network and Security Manager Installation Guide

Generating the License Key for an NSM Appliance Upgrade Installation

Generating the License Key File for an NSM 2007.3 or Later High Availability Upgrade Installation

16
Depending on the package you purchased, Juniper Networks provides an authorization
code via e-mail. If you received a paper license certificate, and are managing more
than 25 devices, call Juniper Networks Customer Service. The Customer Service will
validate your purchase and generate a license key.
Enter the installation ID that was generated by the NSM Server.
4.
The LMS system generates a license key file for the SKU recorded. You can choose
to download the file or to receive it by e-mail.
Save the license key file to your local drive for use during installation.
5.
NOTE: The NSM upgrade to 2007.3 or later release will not proceed without
the license key file if NSM manages more than 25 devices.
To generate the license key file to upgrade an NSM appliance:
Log in to the LMS system and select
1.
Enter the hardware serial number and authorization code.
2.
The hardware serial number is located on the back of the NSM appliance chassis.
Depending on the package you purchased, Juniper Networks provides an authorization
code via e-mail. If you received a paper license certificate, and are managing more
than 25 devices, call Juniper Networks Customer Service. Customer Service will validate
your purchase and generate a license key.
The LMS system generates a license key file for the SKU recorded. You can choose
to download the file or to receive it by e-mail.
Save the license key file to your local drive for use during installation.
3.
NOTE: The NSMXpress upgrade to 2007.3 or later release will not proceed
without the license key file if NSM manages more than 25 devices.
To generate the license key file to upgrade to NSM 2007.3 or later release with high
availability:
Run the NSM installer image on the server designated as your primary NSM (or primary
1.
GUI Server). The NSM Server generates an installation ID.
Run the NSM 2007.3 or later installer image on the server designated as your secondary
2.
NSM (or secondary GUI Server). The NSM Server generates an installation ID.
Log in to the LMS system and select
3.
License key generation for NSM.
License key generation for NSM.
Copyright © 2010, Juniper Networks, Inc.